The equipment treatment system is different from general equipment operation. When the Integrated Sewage Equipment system has just been established or needs to be put back into operation after a long period of inactivity, it must be started after checking the operation. The operator should check the following items before starting the system:

       (1) Whether all equipment has been lubricated;

       (2) Check whether the pipes and valves are well connected;

       (3) Confirm the power supply and water supply system of the integrated sewage equipment, and place all switches on the MCC panel in the open position;

       (4) Check the chemicals in the tank;

        (5) Check the program time setting of the PLC;

        (6) Refer to the stand-alone test report again.