Controlling the inlet flow of integrated sewage treatment equipment is one of the keys to ensuring the normal operation and treatment effect of the equipment. The following are some common measures to control the water inlet flow:

       1, water inlet pump control: You can control the inlet water flow by adjusting the speed of the water inlet pump or turning/off the water inlet pump. pumps can be started.

       2, control of water inlet valve: Install a valve on theintegrated sewage treatment equipmentwater inlet pipe, and adjust the inlet water flow by opening or closing the valve. This control method is relatively simple, but requires manual operation.

       3, Use of flow meter: Install the flow meter on the water inlet pipe to monitor the inlet water flow in real time, and automatically adjust the speed of the water inlet pump or the opening and closing degree of the water inlet valve according to the set flow range through the automatic control system to achieve automatic control.

       4. Water level control: For integrated sewage treatment equipment with a water tank, the inlet water flow can be controlled by controlling the water level of the water tank. When the water level is high, the water inlet pump stops running or the valve is closed. When the water level is low, the water inlet pump starts or the valve opens.

       5. Use of water level detector: Install the water level detector in the water tank. When the water level reaches the set upper or lower limit, the detector transmits a signal to the control system to control the operation of the water inlet pump or water inlet valve.